Skip to main content

When can you paint new plaster?

New plaster should be allowed to dry fully before it is painted. How long that takes depends on the amount and type of plaster, the background and the conditions in the room, so a fixed number of days is not reliable for every job.

Why does plaster drying time vary?

New plaster contains water that has to leave the material as it dries.

Drying is affected by several things, including:

  • the thickness of plaster
  • whether it is a thin skim or a deeper plaster build-up
  • the surface underneath
  • room temperature
  • ventilation
  • humidity
  • how much of the room has been plastered

That is why two apparently similar rooms can be ready to decorate at different times.

Even decorating manufacturers publish different indicative drying periods depending on the type and depth of new plaster, reinforcing why there is no useful universal countdown.

How can you tell when new plaster is dry?

Fresh plaster normally changes noticeably in appearance while drying.

Wet areas tend to remain darker, while dry plaster becomes much lighter and more uniform.

Do not assume the wall is ready simply because the edges have changed colour. Thicker areas, filled chases and deeper repairs can retain moisture after the surrounding skim appears dry.

The whole area being decorated should be allowed to dry properly.

Can you speed up the drying process?

Normal ventilation and a reasonably consistent room temperature help moisture escape.

Opening windows when conditions allow and allowing air to circulate is generally preferable to trying to force the process aggressively.

Avoid blasting newly plastered surfaces with intense local heat simply to meet a decorating deadline. Rapid, uneven drying is not the objective.

The aim is controlled drying throughout the plaster.

What happens if you paint plaster too soon?

Decorating before the plaster has dried can trap residual moisture and contribute to poor paint performance.

Problems may include uneven appearance, loss of adhesion, blistering or peeling.

If you are in doubt, waiting longer is preferable to sealing in moisture.

British Gypsum also identifies residual moisture and premature painting as possible contributors to failures over newly skimmed plaster.

What is a mist coat?

Fresh dry plaster is absorbent, so the first coating needs to be suitable for a new plaster surface.

A “mist coat” commonly refers to a first coat of suitable water-based emulsion diluted according to the paint manufacturer's instructions. Some manufacturers instead offer products specifically designed to seal new plaster.

Do not assume every paint should be watered down by the same amount.

Paint formulations differ, so follow the instructions for the actual product you are using. Dulux, for example, gives product-specific guidance for treating completely dry new plaster before applying finish coats.

Should the plaster be sanded first?

A good plaster finish should not require the whole surface to be heavily sanded before decoration.

Minor imperfections can be dealt with during decorating where necessary, but aggressive sanding of a new finished surface should not be treated as a routine step.

If there are significant defects, discuss them before decorating rather than trying to correct the entire wall with filler and sandpaper.

Plan decorating after the plastering, not before it

If other trades or decorators are following the plastering work, avoid scheduling them so tightly that the walls have no realistic opportunity to dry.

The finish will be better if the plaster is allowed to dictate the decorating date rather than the calendar.

Need plastering before you decorate?

Send us photographs of the room and a brief description of the work required.